Do you know the how to maintain plate hydraulic bending machine? Below is the detail.
1. debugging and running
(1) when the hydraulic plate bending machine is installed and checked, it must be filled with lubricating oil for lubrication.
(2) the couplet of the fastening bolts, etc. to check whether there is loose, if there should be timely tightening.
(3) clean the oil tank, check the filter screen, and if there is a problem.
(4) to check the electrical parts, if there is a problem should be handled in a timely manner, check if there is no problem, then you can switch on the power supply, and then start the motor, check whether the correct steering pump. If you turn to the right, then you should let it air around three minutes.
(5) the electrical and hydraulic components, should check whether the normal work.
2 maintenance
(1) a week to check the oil level, the oil level is too low, whether to add the hydraulic oil.
(2) the oil temperature should be controlled in the range of 35 C and 60 C in high temperature will damage the parts.
(3) the hydraulic parts every month to clean, to prevent dirt into the.
(4) to check if there is no distortion in the bend of the oil pipe, if there is any distortion, such as the.